Bricsys news
Free e-book “Bricscad® for AutoCAD® Users” by Ralph Grabowski updated for V12.
01.des.2011
Bricscade-bookFree
Gent, Belgium: December 1, 2011 -- Bricsys® announces the updated e-book “Bricscad V12 for AutoCAD Users” written by Ralph Grabowski. This free e-book is for CAD users wishing to understand the differences and similarities with Bricscad. It is ideal for offices looking to save on IT expenses by adding lower-cost Bricscad seats.
Read more...
Bricsys® Releases Bricscad® V12 for Windows
12.okt.2011
BricscadV12Direct ModelingQuadBricsys
Gent, Belgium: October 12, 2011 -- Bricsys today announces the release of Bricscad V12 for the Windows platform. This significant release adds powerful geometric and dimensional constraints to all three editions - Classic, Pro, and Platinum – as well as a host of other significant features. With direct modeling, design intent, and 3D constraints, Bricscad becomes the leader in .dwg-based 3D design
Read more...
Menhirs NV Acquires Intellectual Property Rights from LEDAS
05.okt.2011
MenhirsBricsysLedas
Gent, Belgium and Novosibirsk, Russia: October 5, 2011 – Menhirs NV, the parent company of Bricsys NV, announced today that it has acquired the intellectual property rights for several flagship software products from LEDAS. The acquired IP consists of the source code to LGS 2D, LGS 3D, Driving Dimensions, RhinoWorks, and other programs used by the computer-aided design industry.
Read more...
Bricsys Releases Bricscad 11.3 with Powerful New Features. Also opens new features poll.
20.mai.2011
Bricscad11.3FacebookPoll
Gent, Belgium and Merrimack, US: May 19, 2011 -- Bricsys today announced the release of Bricscad version 11.3, an intermediate upgrade with big features that provide users with increased drafting efficiency. In addition, Bricscad announced a new features poll on Facebook, where customers can now request and vote for new features.
Read more...
Fluid Desk releases beta version of FDBES Ventpack for Bricscad V11
05.mai.2011
BricscadApplicationsFluid DeskVentpack Beta
Gent, Belgium and Szczecin, Poland, May 4, 2011. Bricsys and Fluid Desk both announce the release of the beta version of FDBES Ventpack, based on Bricscad. Ventpack is a high-end engineering software for designing HVAC installations. So far Ventpack was only available for AutoCAD®. Following eager anticipation, the Ventpack beta for Bricscad has received a "Most interesting product" award at the VENTILATION FORUM 2011 – the largest Polish HVAC expo taking place March 29-30 in Warsaw.
Read more...
New .NET API for Bricscad Enters Final Beta
03.mai.2011
Bricscad.NET API
Gent, Belgium and Merrimack, NH USA: May 2, 2011 -- Bricsys NV, the developer of Bricscad, today started the final beta cycle of its implementation of the Microsoft .NET Framework API (applications programming interface). This means that application developers can begin testing their .NET-based applications on Bricscad.
Read more...
Bricsys Releases Bricscad V11 Pro for Linux
05.apr.2011
BricscadLinuxV11Pro
Gent Belgium and Merrimack NH, USA: April 5, 2011 – Bricsys NV, the developer of Bricscad, today announced the release of Bricscad V11 Pro for Linux. Just six months after it released the first ever .dwg-based CAD system for Linux, Bricsys now makes the benefits and power of the Pro version of Bricscad available to Linux users. This powerful update adds ACIS modeler and BRX API.
Read more...
Bricsys Meeting Point Released
02.mar.2011
BricsysMeeting PointSupport
Gent, Belgium and Merrimack NH, USA: March 3, 2011 -- Bricsys, the company behind Bricscad, the #1 .dwg CAD alternative, today announced the release of Bricsys Meeting Point, a new online communication hub for end users, application developers, and Bricsys’ .dwg specialists. This new online service provides unmatched three-way support options for applications on Bricscad and AutoCAD®.
Read more...
VidCAD – leading design and documentation tool – released for Bricscad V11
23.feb.2011
BricscadApplicationsVidCAD
Gent, Belgium and Las Cruces, NM USA, February 23, 2011. Bricsys the author of Bricscad and VidCAD LLC the leading software company for engineering design and documentation tools, announced today that the VidCAD SQL Engineering suite of products is now available for Bricscad V11. So far the software had been available for AutoCAD only.
Read more...
Tyco’s SprinkCAD software released for Bricscad
16.feb.2011
BricscadApplicationsTycoSprinkCAD
Gent, Belgium and Landsdale PA, USA, February 16, 2011. Bricsys NV and Tyco Fire Protection Products together announce the release of SprinkCAD for Bricscad. This leading software for Fire Protection Products - formerly only running on AutoCAD - is now available for Bricscad too. A second version for the residential market is exclusively available for Bricscad.
Read more...
Free Bricscad for AutoCAD Users ebook
23.des.2010
BricscadeBookFree
Bricscad for AutoCAD Users ebook is the latest e-book from upFront.eZine Publishing. It describes the similarities and differences between the two CAD programs, and would be of interest to CAD users interested in transitioning to Bricscad.
Read more...
Bricsys releases Bricscad V11 Platinum: 3D Parametric solid modeling now in Bricscad
06.des.2010
BricscadPlatinumV11
Gent, Belgium and Merrimack NH, US December 6, 2010. Bricsys today announced Bricscad V11 Platinum for Windows, a new version enabling 3D parametric solid modeling for users who want to work both in 2D and 3D without leaving the .dwg environment.
Read more...
Bricsys releases Bricscad V11 for Linux
30.nov.2010
BricscadLinuxV11
Gent, Belgium, Merrimack NH, USA, November 30, 2010. Bricsys announces the release of Bricscad Classic V11 for Linux. The new version for the Linux platform is the equivalent of Bricscad Classic V11 for Windows, released on October 18. This first upgrade confirms the Bricsys commitment for the Linux platform.
Read more...
GlobalCAD releases six flagship products for Bricscad V11
29.nov.2010
BricscadV11GlobalCADApplications
Gent, Belgium and Elstead Surrey, UK, November 29, 2010 – Bricsys – the company behind Bricscad and GlobalCAD – developer of professional software for architecture and land planning – announced that six flagship GlobalCAD products are now released for Bricscad V11. Until now, GlobalCAD products were only available for AutoCAD.
Read more...
Bricsys releases Bricscad™ V11 for Windows
18.okt.2010
BricscadV11
Ghent, Belgium October 18, 2010 - Bricsys announced the release of Bricscad V11 for Windows. With this version Bricsys adds again a lot of key features to its successful CAD platform.
Read more...
Bricsys NV and FreshTL Announce Vondle Live on IBM LotusLive
05.okt.2010
Vondle LiveBricsysLotusLiveIBMFreshTL
Ghent, Belgium and Daresbury, UK, October 5, 2010 - Bricsys NV and FreshTL announced today that Vondle Live has been added to the list of "Integrated Apps" available on the IBM LotusLive platform.
Read more...
Bricscad™ V10 for Linux released
06.sep.2010
BricscadLinuxV10
Gent Belgium and Merrimack NH USA, September 6, 2010 – Bricsys is the first to release a .dwg based CAD software for Linux users. Bricsys NV, the developer of Bricscad, announced today that Bricscad V10 for Linux is now available
Read more...
Bricsys on Facebook
24.aug.2010
BricsysFacebook
Bricsys has now an official page next to the Bricsys users group on Facebook. Join the community and spread the word of Bricscad™ the number one DWG CAD alternative and Vondle.
Read more...
Geo-Plus Ports VisionCivil and VisionPlus Software to Bricscad V10
01.jun.2010
Geo-PlusVisionCivilVisionPlusApplicationsBricscad
Gent, Belgium and Laval, Canada, June 01, 2010 – Bricsys NV, the developer of Bricscad, and Geo-Plus, the leading geomatics software company, today announced the release of VisionCivil and VisionPlus software for Bricscad V10. Until now, VisionCivil and VisionPlus were available only for AutoCAD® and MicroStation®.
Read more...
Bricsys releases beta version of Bricscad V10 for Linux
12.mai.2010
BricscadLinux
Gent Belgium and Merrimack NH USA, May 12, 2010 – Bricsys NV, the developer of Bricscad, announced today that the beta version of Bricscad V10 for LINUX is now available.
Read more...
Leading Instrumentation and Control Software Now Available on Bricscad
10.mai.2010
RösbergProdokApplicationsBricscad
Gent Belgium and Karlsruhe Germany, May 10, 2010 – Bricsys NV, the developer of Bricscad, and Rösberg Engineering, a leading software company for I&C (instrumentation and control) systems, announced today that its Prodok software is now available for Bricscad V10. Until today, Prodok was available only for AutoCAD®.
Read more...
Simtra Aviation and Transportation Software Released for Bricscad V10
14.apr.2010
SimtraPathPlanner BricscadApplicationsAviation
Gent, Belgium and Goteborg, Sweden, April 14, 2010 -- Bricsys, the Bricscad company, and Simtra, the leading software company for airside planning and vehicle turn paths, announced today that all PathPlanner software from Simtra is now available for Bricscad V10. Until today, the software had been available for MicroStation® and AutoCAD® only.
Read more...
Bricsys Announces Conference for Application Developers 2010
11.mar.2010
BricsysConference
Gent, Belgium and Merrimack NH, USA: March 11, 2010 -- Bricsys today announced its second annual international Conference for Application Developers using the DWG file format. The conference will be held on June 8 and 9, 2010 in Bruges, Belgium. Bruges is one of the most beautiful and historic cities in Europe, and the conference will be held in the quiet of the brand new Concertgebouw concert hall.
Read more...
Open Design Alliance and Bricsys Cooperate to Enhance the ODA Platform
08.mar.2010
ODAOpen Design Alliance
Phoenix, AZ USA, and Gent, Belgium, March 8, 2010 – Bricsys and the Open Design Alliance (ODA) announce the synchronization of the ODA platform with improvements and enhancements made by Bricsys and a cooperation to further improve the ODA platform.
Read more...
3D Engineering AX3000 software series now on Bricscad V10.
22.feb.2010
AX3000BricscadApplications
Gent, Belgium, February 22, 2010: Bricsys, the company behind Bricscad, announces that all modules of the AX3000 series - developed by ESS EDV Software Service GmbH – are available for Bricscad V10. Until now the software was only available for AutoCAD® and Nemetschek’s All-Plan®.
Read more...
Bricscad at XCES Exhibition at Sandown Racecourse, UK, 2 - 3 March
10.feb.2010
BricscadKeyTERRA-FIRMAXCES Exhibition
Come and see KeyTERRA-FIRMA Ltd., KeyGML and Bricscad at the Exhibition for Construction and Engineering Surveying at Sandown Park Racecourse, Esher, Surrey, UK on 2 - 3 March 2010
Read more...
Bricscad V10 no longer based on IntelliCAD
02.feb.2010
BricscadIntellicadLinux
Gent, Belgium – Merrimack, USA, February 2, 2010. Bricsys, the developer of Bricscad today announced that Bricscad is no longer based on IntelliCAD. The company – owner of the new Bricscad technology - is no longer member of the IntelliCAD Technology Consortium.
Read more...
Vondle Live integrates Project and Data Management into IBM LotusLive
18.jan.2010
Vondle LiveIBMLotusLiveFreshTL
Orlando, Florida US – January 18, 2010: Bricsys, the company that developed Vondle, a cloud-based Project and Data Management System, today announced the integration of Vondle Live into IBM LotusLive. This integration will be available in two versions: Vondle Live Basic and Vondle Live Pro.
Read more...
IBM, Bricsys and Fresh T Limited Collaborate to Integrate Vondle Live into IBM LotusLive
18.jan.2010
Vondle Live IBM LotusLive FreshTL
Orlando, Florida US – January 18, 2010. On the 18th of December 2009, Bricsys NV and Fresh T Limited signed an agreement with IBM to integrate Vondle Live into LotusLive.
Read more...
Bricsys releases Bricscad V10: Gets CAD teams one step ahead.
06.okt.2009
BricscadV10
Gent, Belgium October 6, 2009 - Bricsys announced the release of Bricscad V10, a milestone version for the DWG based CAD market. Bricscad is recognized as the number one DWG CAD alternative by offering a complete and recognizable feature set to professional users. The combination of DWG compatibility, a recognizable interface, real day-to-day support and a reasonable price for new licenses and upgrades were key to its success so far. Bricscad V10 now adds innovation by introducing eBridge for teams.
Read more...
OpenDCL 6.0 includes support for Bricscad Pro, important step for the LISP community.
30.sep.2009
OpenDCLBricscadLISP
Gent, Belgium - September 30, 2009, Bricsys - the developer of Bricscad V9 - today announced that early pre-release builds of OpenDCL 6.0 now support Bricscad V9 Pro. OpenDCL is a very popular Open Source software for programmers who want to replace the limited DCL user interface in AutoCAD and Bricscad with a rich set of modern Windows user interface elements.
Read more...
CivilCAD 2010 now available for Bricscad V9: Full suite offers wide-ranging solutions for civil professionals.
22.sep.2009
CivilCADBricscadCivil
Gent, Belgium and Ra’anana, Israel, September 22, 2009 - Bricsys, developer of Bricscad and Sivan Design, worldwide provider of leading Civil Engineering 3D CAD products announced that the complete CivilCAD 2010 Solution Suite is now also released for Bricscad V9. The seamless integration of over 6 years between Bricscad and CivilCAD continues with the current release.
Read more...
KeyTERRA-FIRMA – the awarded Ground Modelling application for AutoCAD – available for Bricscad V9
15.sep.2009
KeyTERRA-FIRMABricscadGround Modelling
Gent, Belgium and Redditch, England, September 15, 2009 - Bricsys - the company behind Bricscad and KeyTERRA-FIRMA Ltd. developer of professional Infrastructure and Mapping software announced that KTF and KeyGML – so far only available for AutoCAD - are now released for Bricscad V9.
Read more...
Latest version of McNeel’s DOSlib™ now also available for Bricscad
08.sep.2009
DOSlibMcNeelBricscad
Seattle, USA and Ghent, Belgium September 8, 2009 - Robert McNeel & Associates, and Bricsys NV together announce that McNeel’s highly successful DOSlib software - formerly only available for AutoCAD - now also can be downloaded and used - free of charge - for the latest version of Bricscad.
Read more...
Leica Geosystems AG now offers its world leading laser measurement technology also on Bricscad V9
01.sep.2009
Leica GeosystemsBricscad
Heerbrugg, Switzerland and Gent Belgium, September 1, 2009 - Leica Geosystems AG, global leader of survey technology and Bricsys NV, developer of Bricscad today announced that the latest release of Bricscad now supports the Leica DISTO™ D8 plug-in, formerly only running on AutoCAD®.
Read more...
Bricscad and EZ-Plant Set New Price Point for Landscape Design Solution
24.aug.2009
EZ-PlantBricscadLandscape Design
Brussels, Belgium, and Ebensburg, PA (PRWEB) August 24, 2009 – Bricsys NV, developers of Bricscad, and EZ-Plant, Inc., makers of innovative landscape design software, today announced a global partnership that sets a new, compelling price point for a landscape design solution. The EZ- Plant application, formerly running only on AutoCAD, is now available integrated with Bricscad as a combined solution for under $700.00 (US). That compares to a list price of EZ-Plant with AutoCAD of over $4,000.
Read more...
LT Extender Development ends, Torsten Moses recommends Bricscad.
09.mar.2009
LT ExtenderBricscad
Berlin, Germany and Gent Belgium, March 9, 2009 -- CEO Torsten Moses of TM-CAD Ingenieurbüro announces the termination of the LT Extender software product. For the last seven years, TM-CAD has developed an add-on that allowed Autodesk's AutoCAD LT to be programmed and to run custom applications. As of last week, the company decided to stop distribution. This brings to an end a product that reached a large customer base.
Read more...
Bricsys Partners with Metso Automation of Finland
09.feb.2009
Metso AutomationBricscadBRX
Ghent, Belgium, February 9, 2009 - Metso Automation has signed an agreement with Bricsys NV for integrating Bricscad V9 into Metso's software applications. The software controls industrial processes and power plants. Metso Automation supplies process automation for the pulp and paper industry globally, and serves customers in the energy, power, and process industries.
Read more...
SYCODE launches twenty data exchange plug-ins for Bricscad
04.feb.2009
SYSCODEBricscadApplications
Panaji, India / Gent Belgium – 4th Feb, 2009 - SYCODE today launched twenty file import and export plug-ins for Bricscad. "Bricscad is able to read and write DWG, DXF and SAT files only", explains Deelip Menezes, Founder and CEO of SYCODE.
Read more...
Thirty-four New Applications Work with Bricscad V9
19.jan.2009
ApplicationsBricscadBRX
Ghent, Belgium & Merrimack NH, USA, January 19, 2009 – Bricsys announces that the first group of professional CAD applications has been successfully ported from AutoCAD® to Bricscad V9. The initial group consists of thirty-four applications in the primary engineering domains of AEC, mechanical design, civil engineering, and GIS. Bricsys expects to add another one hundred applications within six months.
Read more...
Bricsys Offers Vondle Free to Everyone
10.okt.2008
Vondle
Merrimack NH, October 10, 2008 - Bricsys Inc. announces the release of Vondle Trial, a fully SaaS-based project and data management system. By subscribing to Vondle Trial, customers can use all Vondle features free of charge for 30 days.
Read more...
CraniMAX Successfully Ports Crane Software to Bricscad V9
30.sep.2008
CraniMAXBricscadApplications
Ghent, Belgium, September 30, 2008. Bricsys and Germany-based craniMAX announce that the craniMAX software portfolio has been successfully ported to Bricscad V9. More information about Cranimation.
Read more...
IFD Library Project Chooses Vondle for Managing Documents
22.sep.2008
IFD Library GroupVondle
Merrimack NH, September 22, 2008. The IFD Library Group - a division of the buildingSMART organization - has chosen Bricsys Vondle technology to manage the IFD Library project.
Read more...
Bricsys Releases BRX SDK
15.sep.2008
BRXBricscad
Merrimack NH, USA and Gent, Belgium, September 15, 2008 -- Bricsys today released its all-new BRX SDK software development kit. Independent developers can port their ARX-based applications to Bricscad V9 simply by recompiling their source code. This enables applications to run on two different DWG platforms using the same source code.
Read more...
Bricsys releases Bricscad V9 and enables now professional DWG based engineering applications
08.sep.2008
BricscadV9
Gent, Belgium - Merrimack NH, US, September 8, 2008. Bricsys announces the release of Bricscad V9, the latest version of its flagship product. Already since a while, Bricscad is the preferred 2D and 3D CAD platform for those users who want to extend their number of professional CAD seats or just want to replace other expensive CAD licenses.
Read more...
Kemper GmbH bundles Bricscad V9 with their KEMPER KHS Hygiene System software
01.sep.2008
KemperBricscad
Ghent, Belgium, September 1, 2008. Bricsys announces a volume contract with German based Kemper GmbH for Bricscad V9 in combination with the application developer Dendrit Haustechnik-Software GmbH.
Read more...
Bricsys' web site wins Adobe Site Of The Day award
14.mar.2008
Adobe Site Of The DayAward
Bricsys' web site wins Adobe Site Of The Day award. Adobe recognizes websites based on their use of strong visual designs, superior functionalities, and innovative uses of Adobe products. Adobe wants to give credit to the creative and engineering talent behind the scenes.
Read more...
Application news
iXDim V11 and V12
25.jan.2012
BricscadApplicationsiXDim
Text colors can be changed and saved now.
Read more...
New Release!
07.des.2011
BricscadApplicationsPON CAD Scaffolding 3D
The new version 6.0 has new features and substantial improvement of productivity.
Read more...
iXText V12
26.nov.2011
BricscadApplicationsiXText
Support for V12 added
Read more...
iXDim V12
26.nov.2011
BricscadApplicationsiXDim
Support for V12 added
Read more...
iXBlock V12
26.nov.2011
BricscadApplicationsiXBlock
Support for V12 added
Read more...
BcadTools Update for V12
04.sep.2011
BricscadApplicationsBcadTools Freeware
BcadTools Updated for Bricscad Pro V12
Read more...
Optus Telecom, Australia endorses GeoTools
01.sep.2011
BricscadApplicationsGeoTools
Having been one of the power users of GeoTools, Optus Telecom have had a very close relationship with Coordinate Systems. Thanks to Optus for some really valuable feedback and ideas which have resulted in some major enhancements, new commands and fixes in GeoTools. This has helped GeoTools to grow into a robust application that it is today. Ray Moran, Manager(Network Records), Optus Australia is all praise for GeoTools.
Read more...
PHSCAD Application Ported to Bricscad
25.aug.2011
BricscadApplicationsGeoTools
Bricys India, in cooperation with Pipe Hangers & Supports Pvt. Ltd announces the successful porting of the PHSCAD application on the Bricscad platform.
Read more...
FEM-System MEANS V9 PROFESSIONAL
28.jul.2011
BricscadApplicationsFEM System MEANS V9
MEANS V9 now still efficient and more extensively than previous version MEANS V8!
Read more...
GlobalCAD Unveils 2012 Product Line for Bricscad Pro
03.mai.2011
BricscadApplicationsGlobalCAD Organizer 2012
Developer GlobalCAD announces new product releases, expanding its award-winning range of add-ons and plugins for Bricscad Pro.
Read more...
PM mechanical" with a new command.
29.mar.2011
BricscadApplications2D+3D PM mechanical
The command 'Create new drawing’ has been completely revised. You can open a new drawing with a doubleclick or create, copy, rename and delete your drawing templates comfortable. Plus you can set some variables and drawing shows.
Read more...
Bricsys appoints first Authorized Training Center for Bricscad in India.
01.feb.2011
BricscadApplicationsGeoTools
Bangalore, India, February 1, 2011 - Bricsys NV, Belgium, along with its India partner, Coordinate Systems have appointed VK Design Techniques Pvt. Ltd., Bangalore as an Authorized Training Center for Bricscad software in India.
Read more...
Over 400+ FREE Lisp tools for the Bricscad programmer
23.jan.2011
BricscadApplicationsGeoTools
Coordinate Systems, Bangalore releases a library of FREE Lisp routines for the Bricscad and AutoCAD Lisp programmers.
Read more...
Bricscad Special Promotion In India - Valid Until March 31, 2011
14.jan.2011
BricscadApplicationsGeoTools
Coordinate Systems, Bangalore announces special Bricscad promotion in India. Prices of all the three flavours of Bricscad - Platinum, Pro and Classic have been slashed by 30% during this period.
Read more...
GeOpus TRIAL version available for BricsCAD
15.des.2010
BricscadApplicationsGeOpus
A full functional TRIAL version of the land-surveying application GeOpus is now available for BricsCAD v10 and v11.
Read more...
BcadTools Update
23.okt.2010
BricscadApplicationsBcadTools Freeware
BcadTools Updated for Bricscad Pro V11
Read more...
New Layer Mapper in Sofoco Tools
12.okt.2010
BricscadApplicationsSofoco Tools
Layer Mapper can harmonize an external consultant's drawing with our in-house layer standards.
Read more...
Efficad Tools website
28.jul.2010
BricscadApplicationsEfficad Tools
Efficad Tools website is available in English language.
Read more...
DocTabs Update
10.jul.2010
BricscadApplicationsDocTabs
Maintenance release, Added new menu items, Cascade, Tile horizontally and Tile Vertically.
Read more...
LogBuddy to Excel!
07.jul.2010
BricscadApplicationsLogBuddy
LogBuddy creates a graph in Bricscad showing network license usage. Now LogBuddy 2 adds the ability to export the log to an Excel spreadsheet.
Read more...
Leading Instrumentation and Control Software Now Available on Bricscad
07.jun.2010
BricscadApplicationsPRODOK
Gent Belgium and Karlsruhe Germany, May 10, 2010 – Bricsys NV, the developer of Bricscad, and Rösberg Engineering, a leading software company for I&C (instrumentation and control) systems, announced today that its Prodok software is now available for Bricscad V10. Until today, Prodok was available only for AutoCAD®.
Read more...
Geo-Plus Ports VisionCivil and VisionPlus Software to Bricscad V10
01.jun.2010
BricscadApplicationsGeo-Plus VisionCivil
Gent, Belgium and Laval, Canada, June 01, 2010 – Bricsys NV, the developer of Bricscad, and Geo-Plus, the leading geomatics software company, today announced the release of VisionCivil and VisionPlus software for Bricscad V10. Until now, VisionCivil and VisionPlus were available only for AutoCAD® and MicroStation®.
Read more...
